---------------------------MAKE RAID DISK STORAGE----------------------
STEP 1 :
FOLLOW AS THE HINT,PRESS CTRL-M,START TO CONFIG RAID
STEP 2 :
MAKE 3 RAIDS :1 DISK,1 DISK ,4 DISKS.
---------------------install AS3 operation system in IDE------------------------
step 1:
in installing we choose chinese simplified language package,
step 2:
set operation system default language is us english
step 3:
in install package,wo choose develope package and ftp package
FINISH THE OPERATION SYSTEM INSTALL
--------------------
--------------------fdisk and partition----------------------------------------
step 1
fdisk /dev/sda
n-->p--->1--->return---->+20000M
n-->p--->2--->return---->+20000M
n-->p--->3--->return---->return--->w
fdisk /dev/sdb
n-->p--->1--->return---->return---->w
fdisk /dev/sdc
n-->p--->1--->return---->+40000M
n-->p--->2--->return---->return---->w
mkfs.ext3 /dev/sdc1
mkfs.ext3 /dev/sdc2
step 2
raw /dev/raw/raw1 /dev/sda1
raw /dev/raw/raw2 /dev/sda2
raw /dev/raw/raw3 /dev/sda3
raw /dev/raw/raw4 /dev/sdb1
step 3
add command into /etc/rc.d/rc.local
raw /dev/raw/raw1 /dev/sda1
raw /dev/raw/raw2 /dev/sda2
raw /dev/raw/raw3 /dev/sda3
raw /dev/raw/raw4 /dev/sdb1
chown oracle /dev/raw/raw1
chown oracle /dev/raw/raw2
chown oracle /dev/raw/raw3
chown oracle /dev/raw/raw4
mount -t tmpfs /dev/tmpfs /oradata/bcp_for_ora/m0 -o size=500m
step 4
mkdir /oracle /oradata
step 5
mount /dev/sdc1 /oracle
mount /dev/sdc2 /oradata
it may like this
/********************************************************************/
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
LABEL=/swap /swap ext3 defaults 1 2
/dev/sdc1 /oracle ext3 defaults 0 0
/dev/sdc2 /oradata ext3 defaults 0 0
/********************************************************************/
step 6
add the above two commands into /etc/fstab
------------------------------------------------------------------------------
INSTALL ORACLE
*-----------------------
*notation!!!! as3 linux install must include developer rpms
*-----------------------
===========================================
Step 1.
Add user and group
===========================================
groupadd dba
groupadd oinstall
useradd -g oinstall -G dba oracle
passwd oracle
mkdir /oracle
mkdir -p /oracle/ora9/product/
chown oracle.oinstall /oracle
chown -R oracle.oinstall /oracle/ora9
chmod 755 /oracle
chown -R oracle.oinstall /oradata /dev/raw/raw1 /dev/raw/raw2 /dev/raw/raw3 /dev/raw/raw4
===========================================
Step 2.
Append these lines to
/etc/sysctl.conf to set kernel parameters:
===========================================
kernel.shmmax = 1073741824
kernel.shmmni = 4096
# *******************************
kernel.shmall = 2097152
#********************************
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
===========================================
Step 3.
Append these lines to
/etc/security/limits.conf to
modify your resource limits:
===========================================
oracle soft nofile 65536
oracle hard nofile 65536
oracle soft nproc 16384
oracle hard nproc 16384
===========================================
Step 4.
===========================================
echo 250 32000 100 128 > /proc/sys/kernel/sem
echo 1073741824 > /proc/sys/kernel/shmmax
echo 4096 > /proc/sys/kernel/shmmni
echo 2097152 > /proc/sys/kernel/shmall
echo 65536 > /proc/sys/fs/file-max
echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range
===========================================
Step 5.
Go into the ./rpms directory and
Add the neccessory runtime file
===========================================
rpm -ivh compat-libstdc++-7.3-2.96.122.i386.rpm
rpm -ivh compat-libstdc++-devel-7.3-2.96.122.i386.rpm
rpm -ivh compat-db-4.0.14-5.i386.rpm
rpm -ivh compat-gcc-7.3-2.96.122.i386.rpm
rpm -ivh compat-gcc-c++-7.3-2.96.122.i386.rpm
rpm -ivh tcl-8.3.5-92.i386.rpm
rpm -ivh setarch-1.3-1.i386.rpm
rpm -ivh openmotif-2.2.2-16.i386.rpm
===========================================
Step 6.
Change compilers settings
===========================================
mv /usr/bin/gcc /usr/bin/gcc323
ln -s /usr/bin/gcc296 /usr/bin/gcc
mv /usr/bin/g++ /usr/bin/g++323
ln -s /usr/bin/g++296 /usr/bin/g++
===========================================
Step 7.
Unzip the compressed install file
Notice:
1. Copy the three install file into oracles home
2. change the owner and group to oracle and oinstall
===========================================
chgrp oinstall lnx*
chown oracle lnx*
cpio -idmv <lnx_920_disk1.cpio
cpio -idmv <lnx_920_disk2.cpio
cpio -idmv <lnx_920_disk3.cpio
===========================================
Step 8.
Unzip the compressed install file
===========================================
unzip p3006854_9204_LINUX.zip
cd 3006854
sh rhel3_pre_install.sh
NOTE: If you get the following error when you run rhel3_pre_install.sh:
rhel3_pre_install.sh: line 36: gcc: command not found
Then you forgot to install or link gcc, see above. This means you cant start any binaries any more:
# ls
ls: error while loading shared libraries: /etc/libcwait.so: cannot open shared object file: No such file or directory
# rm /etc/ld.so.preload
rm: error while loading shared libraries: /etc/libcwait.so: cannot open shared object file: No such file or directory
#
To fix that, run the echo command which is a built-in shell command:
# echo "" > /etc/ld.so.preload
rm /etc/ld.so.preload
===========================================
Step 9.
Copy and replace the Oracles .bash_profile
with below contents
Notice :
1. check your oracles path
===========================================
.bash_profile list
# .bash_profile
# take your display with you at remote login:
# Put it into your ~/.bash_profile
# oracle 9i
export ORACLE_BASE=/oracle/ora9
export ORACLE_HOME=/oracle/ora9/product/
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/Apache/Apache/bin:$PATH
export ORACLE_OWNER=oracle
export ORACLE_SID=ora9i32
export ORACLE_TERM=xterm
export JAVA_HOME=$ORACLE_HOME/jdk
export CLASSPATH=./:$ORACLE_HOME/jdbc/lib/classes12.jar:$ORACLE_HOME/lib/xmlparserv2.jar
:$ORACLE_HOME/rdbms/jlib/jmscommon.jar:$ORACLE_HOME/rdbms/jlib/aqapi.jar:
$ORACLE_HOME/rdbms/jlib/xsu12.jar:$ORACLE_HOME/dm/lib/odmapi.jar:ORACLE_HOME/jdbc/lib/nls_charset12.zip
# Use old Linuxthreads with floating stacks instead of
# the new Native POSIX Thread Library (NPTL)
# *************************
export LD_ASSUME_KERNEL=2.4.19
# *************************
export THREADS_FLAG=native
# Edit paths
export PATH
unset USERNAME
umask 022
export LD_LIBRARY_PATH=/oracle/ora9/product/9.2/lib
export PATH=/sbin:$JAVA_HOME/bin:/oracle/ora9/product/9.2/bin:$PATH
#
# change this NLS settings to suit your country:
# example:
# german_germany.we8iso8859p15, american_america.we8iso8859p2 etc.
#
export NLS_LANG=american_america.ZHS16GBK
# User specific environment and startup programs
PATH=$PATH:$HOME/bin:/usr/sbin
export PATH
===========================================
Step 10.
Begin install
===========================================
su - oracle
echo $LD_ASSUME_KERNEL
// Try to find your files location
export DISPLAY=yourIP:0.0 (use the X-Win32)
runInstaller
inventory:/oracle/ora9/oraInventory
unix group name :oinstall
available product :oracle9i Database 9204
choose Enterprise version
only install software
can not create database;
during the install there will be two notce then run the:
sh /tmp/orainstRoot.sh
sh /oracle/ora9/prouuct/root.sh
NOTE :you can remote install
you install x-win32 in your local machine and start it
then you type
export DISPLAY=YOURLOCALIP:0.0
THEN
./runInstaller
===========================================
Step 11.
update gcc
===========================================
rm -f /usr/bin/gcc
rm -f /usr/bin/g++
mv /usr/bin/gcc323 /usr/bin/gcc
mv /usr/bin/g++323 /usr/bin/g++
